StarTech.com DVI to VGA Cable Adapter - DVI (M) to VGA (F) - 1 Pack - Male DVI to Female VGA (DVIVGAMF)

Product Information

Some DVI-D sources use non-standard extensions to output HDMI signals including audio (e.g. ATI 3000-series and NVIDIA GTX 200-series). [17] Some multimedia displays use a DVI to HDMI adapter to input the HDMI signal with audio. Exact capabilities vary by video card specifications.

DVI-I to VGA Cable Adapter - M/F (DVIVGAMF) StarTech DVI-I to VGA Cable Adapter - M/F (DVIVGAMF)

Specifications [ edit ] A passive DVI-to-VGA adapter. This adapter will not work with a DVI-D output. It requires a DVI-I or DVI-A output to get the analog signal to a VGA input (even if the adapter looks like a DVI-D). A more expensive active adapter (or converter) is required to connect DVI-D to VGA. Digital [ edit ] Digital Visual Interface ( DVI) is a video display interface developed by the Digital Display Working Group (DDWG). The digital interface is used to connect a video source, such as a video display controller, to a display device, such as a computer monitor. It was developed with the intention of creating an industry standard for the transfer of uncompressed digital video content. However, DVI-I and DVI-D are still found on monitors and computers. I won’t be talking about DVI-A in this article because it’s rarely used today. And I have an adapter which converts DVI to VGA... so I plug this onto the graphics card and put my VGA cable into it, and plug the other end of the VGA cable into the monitor. An earlier attempt to promulgate an updated standard to the analog VGA connector was made by the Video Electronics Standards Association (VESA) in 1994 and 1995, with the Enhanced Video Connector (EVC), which was intended to consolidate cables between the computer and monitor. [3] [4] EVC used a 35-pin Molex MicroCross connector and carried analog video (input and output), analog stereo audio (input and output), and data (via USB and FireWire). At the same time, with the increasing availability of digital flat-panel displays, the priority shifted to digital video transmission, which would remove the extra analog/digital conversion steps required for VGA and EVC; [5] :5–6 the EVC connector was reused by VESA, [6] which released the P&D standard in 1997. [3] P&D offered single-link TMDS digital video with, as an option, analog video output and data (USB and FireWire), using a 35-pin MicroCross connector similar to EVC; the analog audio and video input lines from EVC were repurposed to carry digital video for P&D. [5] :4 [7] :§1.3.3

Uses for DVI

The DVI specification includes signaling for reducing power consumption. Similar to the analog VESA display power management signaling (DPMS) standard, a connected device can turn a monitor off when the connected device is powered down, or programmatically if the display controller of the device supports it. Devices with this capability can also attain Energy Star certification. DVI-I single-link connectors have 23 pins (18+5) and dual-link connectors have 29 pins (24+5). DVI-I connectors do not convert analog and digital signals but can accept digital or analog signals – just not both at the same time. If a video card, monitor and cable all have DVI-I connections with the ability to support both analog and digital signals, one mode of operation has to be selected. True to their purpose, DVI-I connectors will work with all three DVI cable types. However, a male DVI-I cable will not fit in a female DVI-D connector due to its additional analog pins. Hence, when considering the rarity of a DVI-A connector, a DVI-D cable is the most commonly applicable out of the three cable types. Most modern AV equipment usually has an HDMI connector, which can send high-quality digital video and audio signals. Whether you want to build your own home theater or just learn more about TVs, displays, projectors, and more, we've got you covered.

Batocera 15kHz Video Output - Wiki

There are three types of DVI cables and connections, and each has a slightly different pin configuration: Kruegle, Herman (2006). "8". CCTV Surveillance: Analog and Digital Video Practices And Technology. Butterworth-Heinemann. p.268. ISBN 0-7506-7768-6. When DVI was designed, most computer monitors were still of the cathode ray tube type that require analog video synchronization signals. The timing of the digital synchronization signals matches the equivalent analog ones, so the process of transforming DVI to and from an analog signal does not require extra (high-speed) memory, expensive at the time.The male DVI connector plugs into your device’s female DVI output, and you connect a standard VGA cable to the female VGA connector.