Quad Lock USB Weatherproof Wireless Charging Head, for Quad Lock Motorcycle Mounts, for Quad Lock 360

Product Information

There’s still the question of whether that movement is beneficial for the phone compared to being held rigidly in place, such as in the case of the claw device. I suspect it’s better for the phone since at least some high-frequency vibes were likely damped out. But I don’t have any scientific measurements to say one way or another with certainty. The only time to be concerned is if that light starts flashing. If it’s flashing blue there is an error, flashing green means low power coming from the charger and/or bike battery and if it starts flashing pale blue the charger is overheating. I don’t recall seeing any of these lights yet. We have further information about expected wireless charging speeds and the effects of heat over here. This is an issue with the Google phone, rather than the case, and it does seem to need a lot of power to wirelessly charge effectively.

How well the charging head works—Does the charging head keep the phone fully charged, and does it charge correctly in the rain? iPhones: 14 Pro Max, 14 Pro, 14 Plus, 14, 13 Pro, 13 Pro Max, 13, 13 mini, SE (3rd and 2nd Gen), 12 Pro, 12 Pro Max, 12, 12 miniWhat is the effect of the vibration damper—does it help dampen vibration and reduce movement of the phone to keep the display readable when encountering bumps? If the power button on the wireless head is switched on , it will draw 12mA. If the power button on the wireless head is switched off , it will draw 6mA If you wire it via a SAE connector directly into your battery, the device will draw a very slight current when not in use (unless using our 12V to USB Smart Adaptor in Auto mode of course, in which case the device will shut off when the battery drops to 12.5V) I’d recommend having the USB head connected to an outlet that’s disconnected when the bike’s turned off (or go for the hard-wired version). The wireless head does ‘remember’ its last state when powering up, so you could leave it turned on and ready to charge if you have a switched auxiliary supply. A: The Motorcycle Wireless Charger may draw a small amount of power from your battery when not in use depending on how you have wired it up.

Apple's guide to temperature regulation, which has some crossover with other phone brands, recommends keeping your phone out of direct sunlight or operating in a hot vehicle. Two screws are used to fit the base, with a pair of 16mm and 18mm-long M4s supplied to replace the ones fitted to your bike. Make sure you use the right length, and don’t force them if they seem to be bottoming out. What's the difference between Weatherproof Wireless Charing head and the standard Wireless Charging Head?

Customer reviews

While it should be positioned with the USB-A port angled downwards – so water and filth don’t collect in it – the case itself is IP66 rated (dust-tight and resistant to powerful jets of water), and the port is IPX8 (not dust resistant as it’s open, but fully resistant to immersion in water). There’s no USB cable supplied, though you’ll almost certainly have one to suit your phone already. Both versions of the mount come with two sets of expanding spacers, but the Pro’s are a different design with a slightly larger range of 12.4mm to 25.4mm. For either to work, the tube must be smooth internally with a minimum depth of 45mm – if there’s any lip inside it won’t fit.

Purely anecdotally, I have been told by a dealer that they had some instances of iPhones (I don’t know which models) experiencing issues while using a dampener, but I haven’t been able to verify them and there are a huge number of people using them without any problems. These issues seem to be predominantly with iPhones, and when I spoke to SP Connect, they confirmed that the vast majority of problems they’d come across were with Apple devices, and of these they were mainly the iPhone X, 11 and 12 series, but not the 12 Pro Max, which has Sensor-Shift OIS. They told me that issues with the iPhone 13 are very rare, with none reported on the 14, both of which use Sensor-Shift. They also pointed out that unlike on Apple devices, the OIS on Samsung is deactivated when the camera’s not being used. Is it more of a problem with some devices than others due to the construction of the OIS? If so, what is the difference in the devices?

Compatibility with MagSafe products may vary and third-party wireless chargers may vary depending on device and charging model. What's the difference between Weatherproof Wireless Charging head and the standard Wireless Charging Head? Once the mount is attached to the bike, removing the lever mechanism allows fitment of the wireless charging head, which you then wire up to the bike’s battery so it can charge your phone.