LG Original Remote Control AKB74815301

Product Information

VIZIO TVs are connected to soundbars in the same way as the instructions above, through an optical or HDMI connection. For an optical connection on the VIZIO TV, the port may be called ‘S/PDIF’, and for an HDMI ARC connection, use ‘HDMI 1’, which is the ARC port. https://www.youtube.com/watch?v=DpfKcxeZ-ts Video can’t be loaded because JavaScript is disabled: 📺👉LG SoundBar remote controller COV 3390903002 (https://www.youtube.com/watch?v=DpfKcxeZ-ts) How can I control my LG soundbar without the remote? When utilizing HDMI ARC to connect to your Hitachi Roku TV remote, you’ll want to head to TV settings > Audio > Audio Preferences. Then, set the ‘Audio Mode’ to ‘Auto (DTS)’ to connect to your soundbar automatically. Also, select ‘Auto-detect’ in the S/PDIF and ARC settings. You can also press the power and volume down button on the soundbar. Do this for 10 seconds to reset the LG soundbar. Get some fresh batteries and see if this solves the issue with your remote. 2. Wrong Battery Placement

After connections have been made and settings have been adjusted, you may need to adjust the soundbar’s volume to optimize the sound now that it is controlled through the TV. The silver remote with the RED OK button will work with the remote codes above – The gray remote with the RED OK button is considered legacy equipment, therefore there are no new remotes with updated codes. When using an optical connection, the setup is the same as the instructions above. After your optical cable is connected to both your soundbar and TV, you will go to the TV settings, turn off the TV speaker, and change the source to ‘Optical’. Now, that’s a lot of instructions, but there are on-screen guides for this process. Once you connect a universal remote, you can control LG compatible devices on one remote. The digital optical and HDMI ARC connections are made just like the instructions above. You’ll use the Sound > Sound Out area to change the output to HDMI or optical.This is more common when you’re watching TV using a set-top box such as a Sky or Freeview box. Even if your set-top box is connected to your TV and your TV to your soundbar, you may find the audio only gets to your TV's speakers. With an HDMI ARC connection, your soundbar’s source will automatically change to TV ARC, then you can use the TV remote’s right direction on the direction pad to activate/deactivate Anynet+, which only works with an HDMI ARC connection. While the instructions above are a general way to go about connecting and controlling your soundbar with your TV, many TV manufacturers (and computer makers – our guide) have slightly different ways of going about it. Based on your TV manufacturer, find your listed brand and follow the instructions below. Samsung For the best audio possible, you can also change the ‘Digital Audio Out’. Go to Settings > Sound > Advanced Settings > Digital Audio Out > Dolby Digital Plus, and then connect using an optical cable. Conclusion Again, you can press the Bluetooth button and power button for 10 seconds. This will also reset your device.

Through this application, the User can configure various features and control sound effects of LG Sound Bar. Hitachi is known for its low-priced smart TVs, which often come with Roku TV built-in. Connecting your soundbar to a Hitachi Roku TV is the same as if you use your Roku remote (no matter your TV brand) to control all of your TV and media. If you have a soundbar connected via a 3.5mm cable, make sure your TV's volume is turned up as high as it can go. This means you only ever need to adjust the volume using your soundbar’s remote control and also means your TV is delivering a powerful enough signal to ensure your soundbar never goes to sleep when sound is playing. Sometimes resetting your soundbar is the easiest way to fix any issue with it. But know that this will erase all the data and settings on the device. This process usually requires the soundbar remote. But there’s a way to restore the factory settings soundbar without a remote.If you don’t immediately hear the TV’s sound, then you need to go to your TV’s sound or audio settings and turn off your TV speaker. It should be under ‘TV speaker’, ‘speaker list’, or something similar. On this same list, you should see an option for “HDMI Arc” or something similar. Select this option to tell your TV to route the audio channel through the soundbar. When Using Optical: Sony TVs can be connected to a soundbar through the HDMI ARC connection, an optical digital audio cable only, or with both an HDMI and optical digital audio cable. All of the setups are the same as the instructions listed above. When switching the audio output setting, you’ll select ‘Audio System’ for all setups.

Apply the TV volume IR into the LG Soundbar. OR… Use AUX mode on your CABLE/SAT remote to control the sound bar as the newer remotes will accept the codes under the AUX mode. Press the input button and Bluetooth button on the soundbar for 10 seconds. This combination will reset the soundbar.All codes reported working with LG Soundbar models: NB2022A, NB4530, LSB316 Soundbar, NB3510A, NB3532A, NB3520A, NB3530A, NB2540, NBN36 280 watt, LG 300W, LAS454B, LSB 316 Sound Bar with wireless Subwoofer, etc.