MOZA Air 2 3-Axis Handheld Gimble Stabilizer/camera stabilizer for DSLR Mirrorless and Pocket Cinema Cameras 9lbs(4.2KG) Payload

Product Information

I powered the camera through the Weipu port for 4 hours when I first received it in Dec and never had any problems. MOZA Air 2 three axes of pan, tilt and roll enable smooth filming from various angles and track tough to follow subjects. An intelligent OLED display provides intuitive information feedback, accurately indicates the gimbal status, and helps adjust the gimbal and camera parameters. I like that there are two different sized holes as it makes it quick and easy to attach the gimbal to just about anything.

The only thing I don’t like is that the record start/stop button on the gimbals handle is the same button that also turns the Moza Air 2 on and off. The efficient AI calculation system enables the Moza App to select the optimal parameters based on the total weight on your gimbal. You can also Auto-tune the gimbal so it will determine what is the best power level based on the weight it has on it. I took one batter out and it seemed to work fine but then about 30 minutes later it started blinking again.

Now, this is from official Blackmagic source: "For Pocket Cinema Camera 4K, you should factor in at least 22W with high frame rates, screen at 100% and recording to a media. The new MOZA SPARK power supply system offers 4 accessory ports that can power the camera, and film accessories like an electronic follow focus, LED light, and a monitor. This can make a motorised camera gimbal an attractive option for anyone looking to improve their handheld video shooting capability.

One-step Balancing The MOZA Air 2 quick release system accepts Manfrotto quick release plates and offers one-step balancing by way of a built in hard stop. Calibration is import to all gimbals and calibrating the gimbal correctly will ensure a level horizon and drift free operation.Devices that have a power out port are also announcing at least the voltage and wattage they are meant for. My question was really about runtime with the Moza's 4 18650 batteries inside powering the Pocket 4K without a battery. Even though the C100 Mark II (and this will probably apply to most smaller digital cinema cameras) is well under the maximum payload capacity of the Moza Air 2, you have to move it as far back as you can to achieve the correct balance. The reason it is a lot larger is mostly due to the fact that Moza had to incorporate a wireless transmitter and battery into the motor. The control cable worked well with the Canon 5D Mark IV and I was able to change ISO, f-stop, shutter speed, as well as remotely start/stop recording.