Polyvine CAS220G Cascamite Powdered Resin Wood Glue 250g, White

Product Information

Cascamite” is a brand name used for a powder urea formaldehyde resin adhesive, and it became synonomous with any adhesive which met this specification, i. Ideal for joinery, cabinetwork and assembly gluing, particularly when small amounts of glue mix are needed, or when demand is such that the use of a liquid adhesive is uneconomic. Whether to use Cascamite or PVA is a common dilemma amongst trades who are creating products with wood.

Cascaphen is a professional, two part glue has been specially developed for waterproof exterior use and can stand continuous immersion in water. Ensure the wood substrate is sound, smooth, level, clean, dry and free of any dust, dirt, wax, loose paint, incompatible curing compounds or fire retardant chemicals, fungicides, release agents, sealers, or any other foreign substances that might interfere with a good bond.Cascamite – The original powdered resin wood glue with gap filling properties which ensures weather and water resistant joints every time. As they are one component, meaning no mixing required, and water based, so relatively safe to use, PVA wood adhesives. Woodstikk® One Shot is a one-component urea powder adhesive, which only requires mixing with water to make it ready for use. It is especially suitable for joinery, cabinetwork and assembly gluing, particularly when small amounts of glue mix are needed, or when demand is such that the use of a liquid adhesive is uneconomic. Mixing - Use a dry, preferably non-metallic container, and add water to the powder gradually, stirring to ensure the powder is evenly mixed.

These adhesives are commonly used in wood working application for veneering, laminating and joint bonding.The setting time is fast, but will allow adequate working life for most envisaged applications using hot and cold pressing techniques. Since we have acquired the brand in April 2023, we have reformulated the Cascamite adhesive back to how it used to be many years ago. Please note: this is the brand new Ureka Cascamite formula, tried and tested, we can confirm that this version has been vastly improved and is as good as, if not better, than the original formula which was loved by many. We don’t sell the information collected by cookies, nor do we disclose the information to third parties, except where required by law (for example to law enforcement agencies).

Addition of too much water will seriously reduce the rate of setting and the gluing properties, particularly at low temperatures. Ureka Global have two One Shot or Cascamite type wood adhesives which are the Aerolite UP4145, and the Woodstikk one shot powder adhesive. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. The powder system enables extremely good gap filling properties ensuring water does not enter the joint and produces the strongest bond. The product page you are looking for might have been removed, had its name changed, or is temporarily unavailable.Follow the manufacturer's guidelines on the container at all times, following any special precautions. We use the most reliable and cost-effective couriers to get your item to you as swiftly as possible.

There are a number of differences between the two types of adhesive, even though they are both desigined for bonding wood and timber. Please note: If bonded wood is to be turned on a lathe, it is recommended the wood be seasoned for a minimum of one week before turning. As a precaution, any glue spilt on the hands should be removed immediately with soap and water before it sets. By adding water to the stated mix ratio, an excellent adhesive is created which bonds wood exceptionally well. Many tradesmen who work with wood are familiar with the adhesive “Cascamite” (sometimes spelt “Cascomite”).A brief guide showing the differences between Cascamite and PVA wood adhesives, what they bond, and which is the best adhesive to use.