Evolution Power Tools FURY5 - S Fury 5-S Table Saw With Multi-Material Cutting, 1500W, (230 V)

Product Information

I didn't expect perfection, but it's minor flaws can be worked round, so overall, I'm pleased with the machine. raise the blade to its full height for easier access, loosen the black metal blade guard (riving knife) behind the blade (which the blade guard bolts onto) and raise it up so the hole the blade guard connects to is level or slightly above the blade. The “T”-rod which inserts in the inverted “T”-slots of the main table has considerable play, once in place, and care must be exercised when using it to compensate for this situation. Credit subject to status, UK residents only, Toolstation Ltd, acts as a broker and offers finance from a restricted range of finance providers, PayPal Credit is a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH. I found though that the blade had to be much higher otherwise the material got stuck at the rear of the blade guard which wasn't clearing it.

Ideal for cutting steel sheets, rectangular profiles, cast iron pipes, scaffolding, skirting and canopies. Initially they suggested it had been misused but I pointed out this should be able to take some punishment and I had not misused it, they did then send the new part (wrong bit 1st time but quickly rectified). If you get a straight cut then be prepared to do a lot of sanding as the cut itself will be bad as the wood constantly moves if you put slight pressure on it towards the fence. Insert: The green insert plastic around the blade is very week and will flex if any pressure is applied to it. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging .Secondly, when working the table saw produces a lot of dust but this can be solved by fitting dust collector using adapters.

I've adjusted what I can but not much can be done about a table bed with runner slots that aren't parallel.

It certainly has a degree or two of drift as you're sliding it side to side, but pushing back on the fence puts it back square, and locking it results in a solid, square fence.

With the exception to the partially flimsy rip fence (as it only locks on one end) this thing is epic! The only way to get it to cut straight is to press it up against one side of the track while at the same time move it forward. My point is have you had it securely fixed previously and the problem has just arisen or have you had the issue from day 1 .

Please note: That Klarna is an independent payment company and Evolution Power Tools Limited has no influence over whether your payment with Klarna is accepted or not. mitre gauge with anti-vibration clamp device which safely and securely minimises movement in material when cutting at a desired angle. To enable personalised advertising (like interest-based ads), we may share your data with our marketing and advertising partners using cookies and other technologies.

Please note that details and specifications contained herein, are correct at the time of publishing.Please include what you were doing when this page came up and the Cloudflare Ray ID found at the bottom of this page. Keep in mind that anyone can view public collections - they may also appear in recommendations and other places. I wonder if that black plastic part is not close enough to the metal table top and hence is not trueing up against it when you tighten the lock.