Lecol 5500 Wooden Flooring Adhesive for New & Reclaimed Parquet & Wood Block 6kg

Product Information

Cement composition floors corresponding to the norm and chipboards can generally be bonded without pre-treatment using Lecol 5500.

Drying time: grindable after approx. 16-24 hours in normal climate conditions. When the substrate is very absorbent, grinding can be effected after about 8 hours. You can seal the concrete sub floor in your hallway with a product called Lecol PU280, its a liquid moisture barrier that is rollered onto the subfloor and dries in about 45 mins, it will seal in old residues and is a good adhesion promotor also, if you use lecol 5500 as your adhesive the adhesion is amazing, application is easy, use a 9"medium haired roller and a paint tray, apply it as you would if you were emulsioning a wall, 1 coat is ok but 2 is better, this stuff can prevent 65% of moisture from coming up from the slab....really is top stuff.The Lecol 5500 parquet adhesive, (produced by Wakol), is a solvent-based water free parquet synthetic adhesive. This adhesive has a very high initial adhesion and a good filling capacity. This product is suitable for the installation of almost any parquet type. Compatible with the WAKOL WAKOL D 3055 Parquet Primer. Lecol 5500 Adhesive is solvent-based and can be used for all types of wood. It is suitable for installation on absorbent and non-absorbent subfloors meaning that it can be universally applied. In many cases this adhesive can even be used to install pre-finished parquet without any problems. Lecol 5500 Parquet Adhesive is alcohol-based and can be used for all types of wood. It is suitable for installation on absorbent and non-absorbent subfloors meaning that it can be universally applied. In many cases Lecol 5500 can even be used to install pre-finished parquet without any problems. Finally, completing the Lecol range is the 5500 adhesive. This alcohol-based adhesive can be used for all wood types and is suitable for use on both absorbent and non-absorbent subfloors. It can also often be used to install pre-finished parquet without any issues. Lecol 5500 Parquet Flooring Adhesive is solvent-based and can be used for all types of wood. It is suitable for installation on absorbent and non-absorbent sub-floors meaning that it can be universally applied. In many cases it can even be used to install pre-finished parquet without any problems. Our customers consistently report first class results with Lecol 5500 and comes highly recommended by Floor Sales Online.

Lecol 5500 Parquet Adhesive: alcohol based Parquet Adhesive 5500 can be used for all types of wood and is suitable for installation on absorbent and non-absorbent subfloors; i.e.: it can be universally applied. In many cases it can even be used to install pre-finished parquet without any problems. Lecol 5500 is a water-free synthetic resin adhesive. Chip boards have to be nailed (screw nails) or screwed down; they are not allowed to move. Laying should be diagonal to the chipboard joints. Goods supplied incorrectly entirely through the Company’s fault will be re-supplied at no cost to the Customer. through their meticulous research into developing high peforming products that achieve the best results. WAKOL MS 230 elastic Parquet Adhesive is also a flexible MS Polymer Adhesive suitable for the installation of engineered wood and small solids (refer to data sheet).Lecol is the man brand of the Lecol Group which also includes Wakol and Loba, which collectively provide a comprehensive flooring system. Wakol offers an extensive range of parquet flooring adhesives. The right adhesive for every situation and ultimately the best end result. Wakol flooring adhesives can used singularly, or as part of a system with Wakol primers and levelling compounds. The high quality flooring adhesives are based on various technologies, such as dispersion, polyurethane, MS polymer and synthetic resin. All Wakol adhesives are suitable for installing wooden floors on sub floors that contain underfloor heating (UFH). Lecol PVAc-adhesive is a water-based dispersion adhesive suitable for tongue and groove bonding for floating wooden and laminate floors. The adhesive is waterproof and classified as D3. It is supplied in bottles that are specifically designed for the application of the Tongue and Groove adhesion.