Amazon Basics USB 2.0 A-Male to Micro B Cable, 3 feet, Black

Product Information

Oppo Super VOOC Flash Charge, are also known as Dash Charge or Warp Charge on OnePlus devices and Dart Charge on Realme devices USB3.1, released in July 2013 has two variants. The first one preserves USB3.0's SuperSpeed operation mode and is newly labeled USB3.1 Gen 1, [32] [33] and the second version introduces a new SuperSpeedPlus operation mode under the label of USB3.1 Gen 2 (marketed as SuperSpeed+ USB). SuperSpeed+ doubles the maximum data signaling rate to 10Gbit/s (later (USB 3.2) marketed as SuperSpeed USB 10Gbps), while reducing line encoding overhead to just 3% by changing the encoding scheme to 128b/132b. [32] [34] Watt to Know About iPhone & iPad Power Adapters | Analysis". The Mac Observer. Archived from the original on December 10, 2011 . Retrieved December 12, 2011.

The USB3.2 specification added a second lane to the Enhanced SuperSpeed System besides other enhancements, so that the SuperSpeedPlus USB system part implements the Gen 1×2, Gen 2×1 and Gen 2×2 operation modes. The SuperSpeed USB part of the system however still implements the one-lane Gen 1×1 operation mode. Therefore, two-lane operations, namely USB3.2 Gen1× 2(10 Gbit/s) and Gen2× 2(20 Gbit/s), are only possible with Full-Featured USB-C Fabrics. [7] As of 2023, [update] they are somewhat rarely implemented; Intel, however, starts to include them in its 11th generation SoC processor models, but Apple never provided them. On the other hand, USB3.2 Gen1(x1) (5 Gbit/s) and Gen2(x1) (10 Gbit/s) has been quite common for some years. In May 2021, the USB PD promoter group launched revision 3.1 of the specification. [58] Revision 3.1 adds Extended Power Range (EPR) mode which allows higher voltages of 28, 36, and 48 V, providing up to 240 W of power (48 V at 5 A), and the "Adjustable Voltage Supply" (AVS) protocol which allows specifying the voltage from a range of 15 to 48 V in 100 mV steps. [71] [72] Higher voltages require electronically marked EPR cables that support 5 A operation and incorporate mechanical improvements required by the USB Type-C standard rev. 2.1; existing power modes are retroactively renamed Standard Power Range (SPR). In October 2021 Apple introduced a 140 W (28 V 5 A) GaN USB PD charger with new Macbooks. [73]And that’s another scenario in which USB-C trumps Micro USB. Only Type-C connectors can implement the new USB Power Delivery Mode (PDM), allowing for superfast charging of even the bulkiest phones. Micro-USB: Micro-USB connectors are smaller and more commonly used in various devices, including smartphones, tablets, digital cameras, Bluetooth speakers, and many other portable devices. They are reversible, allowing insertion in either orientation. Universal Serial Bus 2.0 Specification, Section 7.2.1.4 High-power Bus-powered Functions" (ZIP). usb.org. 27 April 2000. Archived from the original on 10 September 2013 . Retrieved 11 January 2014.

Universal Serial Bus ( USB) is an industry standard that allows data exchange and delivery of power between many various types of electronics. It specifies its architecture, in particular its physical interface, and communication protocols for data transfer and power delivery to and from hosts, such as personal computers, to and from peripheral devices, e.g. displays, keyboards, and mass storage devices, and to and from intermediate hubs, which multiply the number of a host's ports. [2] USB was originally designed to standardize the connection of peripherals to computers, replacing various interfaces such as serial ports, parallel ports, game ports, and ADB ports, [3] and prior versions of USB became commonplace on a wide range of devices, such as keyboards, mice, cameras, printers, scanners, flash drives, smartphones, game consoles, and power banks. [4] [5] It has evolved into a standard to replace virtually all common ports on computers, mobile devices, peripherals, power supplies, and manifold other small electronics. In the current standard the USB-C connector replaces the many various connectors for power (up to 240W), displays (e.g. DisplayPort, HDMI), and many other uses, as well as all previous USB connectors. While converters exist between certain legacy interfaces and USB, they might not provide a full implementation of the legacy hardware. For example, a USB-to-parallel-port converter might work well with a printer, but not with a scanner that requires bidirectional use of the data pins. Universal Serial Bus 1.1 Specification" (PDF). cs.ucr.edu. 23 September 1998. pp.150, 158. Archived (PDF) from the original on 2 January 2015 . Retrieved 24 November 2014. The 24-pin double-sided connector provides four power–ground pairs, two differential pairs for USB2.0 data (though only one pair is implemented in a USB-C cable), four pairs for SuperSpeed data bus (only two pairs are used in USB 3.1 mode), two "sideband use" pins, V CONN +5V power for active cables, and a configuration pin for cable orientation detection and dedicated biphase mark code (BMC) configuration data channel. [27] [28] Type-A and Type-B adaptors and cables are required for older hosts and devices to plug into USB-C hosts and devices. Adapters and cables with a USB-C receptacle are not allowed. [29]a b "Minty Boost — The mysteries of Apple device charging". Lady Ada. 17 May 2011. Archived from the original on 28 March 2012. Universal Phone Charger Standard Approved" (Press release). ITU. October 22, 2009. Archived from the original on March 27, 2010 . Retrieved May 22, 2023.