ZDOZITZ Trim Puller Pry Bar - Skirting Board Removal Tool, Removal Multi-Tool for Skirting Board, Baseboard, Molding, Siding and Flooring Removal, Remodeling

Product Information

Next, take a Stanley knife and run it along the edges of the skirting board to break the sealant holding the board in place -skirting boards are usually glued to the wall. This step is important as it helps prevent damage to the plastering of the wall. It also makes removing the skirting boards a lot easier! You can also use the crowbar or the chisel if you prefer to gently start loosening up the board. If you’re wondering how to remove the architraves too, it’s pretty similar -it’s a good idea to run your knife down the inside edge of the sealant.

Occasionally, especially for older skirting boards like those in period homes, your skirting board may be fitted to the wall with large nails. If so, remove the skirting board’s nails or screws. Move any cables out of the way, or ask an electrician to move them, too. Often, it’s easier and less expensive than you might think to get old pipes and cables buried into the wall. Are you worried that sanding your skirting boards may leave some gouges and swirl marks behind? This orbit sander prevents this with its power control systems.

Elevate your skirting boards

Assuming that the skirting boards have been nailed into the wall there are a few options that will get the job, but you will need some extra tools. If you want to change the colour of your skirting boards or restore their natural wood look, you may need to remove the old paint first. But how do you do that without damaging the wood or the wall? When you have a line of drilled holes, you can use a chisel to cut along the line and create a break in the board. The obvious problem here, is accessing the fixings once the boards are fixed in place. Once this happens, the screw holes are filled and then they are painted over. This belt sander also comes with a longer power cord. It allows you to move around your workspace with ease. Additionally, it helps in covering larger areas.

There are various types of sanders in the market. It is essential to have a proper understanding of how each of them works. Following this, take your crowbar or a chisel and place it on the joint where the board meets the wall. Next gently hit with your hammer to separate the board from the wall. Do this in a few places to create a small gap behind the skirting. This random orbit sander is not very aggressive like the other electric sanders. However, it can sand efficiently. It also functions with much higher control. The motor is of a powerful 300 Watts.Once you’ve determined the optimal heat setting, direct the heat gun towards the skirting board, maintaining a distance of about an inch. Removing a skirting board is a pretty simple task. However, you need to know how to remove skirting boards correctly, or you can damage the surrounding walls, cables and pipes. An electric sander is the best choice for your skirting boards. It works efficiently to give you the best results. You can get a smoother finish with its help. Moreover, it makes your task almost effortless and saves you a lot of time. Place drop cloths, old sheets, or plastic sheeting on the floor, ensuring they butt up against the skirting boards. This protects the floor and the lower part of the skirting from any potential drips or spills.

At the end of our suggested step by step guide, you'll find the answers to the most frequently asked questions about how to remove skirting boards successfully, read on!Orbital sanders can give you a much smoother finish than a belt sander. It also works well with large surface areas. Moreover, it gives you better access to edges and corners.