Parrot MKi9200 Hands-Free Car Kit

Product Information

My wifes iPhone X works fine on my parrot. I’ve tried my work Samsung phone worked ok, as well as two of my friends iPhones also and all connects and pairs fine for phone calls, bluetooth audio and shows as a paired device. My old iPhone 7 same iOS worked fine also.. I’ve tried my phone on another Parrot MKi9200 and that worked ok too and I can connect just fine which makes things stranger. There was a batch of MKi9100s with a tolerance problem on the dislay connector molding. It is easy enough to cure. Hello, I have a problem where I put a usb drive, and select a song from the folders, however the car does not react and the song does not start as the Parrot is showing that the song is playing. I have a Parrot MKI9200 and audi a4 b7. Also I can make calls trough the speakers when conected with my phone, however when I try to put audio trough bluetooth, same issue. No sound, no nothing.. Hi, i got the Parrot MKI9200 and it’s been working fine with my iPhone 7 IOS13.3.1 but now, when i connect my phone n play a song, it shows that it’s playing but no sound comes out, however, if someone was to call, it would work normally

Parrot MKi9200 (English - 30 pages) User manual Parrot MKi9200 (English - 30 pages)

As part of the update the display firmware is also updated when the MKi9200 re-starts after the update and it’s possible that this corrupted it. From your description this would point to a power supply issue or a faulty MKi9100. To diagnose further you will need a multimeter.With power applied measure the voltage on the Red permanent 12v wire and make sure it does not go off when you turn the ignition off. If this is ok measure the voltage when playing music atlow level and then increase volume. If the voltage is between 12 and 14.5 this is normal and would point to a control box issue. Turn on ignition and wait approx 30 seconds for the kit to turn on. Press and hold for 2 to 3 seconds the RED and GREEN buttons on the remote at the SAME TIME. You will hear “Memory Erasing in Progress”, after which the MKi9000 will re-boot. After it has powered up again, press the centre button to select English (or other language by rotating jog wheel) as the required language. It will then re-boot once more. Proceed to Stage 2.

Parrot MKi9200

From your description this would point to a power supply issue or a faulty MKi9200. To diagnose further you will need a multimeter.

Hi, I have a Pixel 3 android device and a Parrot MKi9200. Bluetooth works just fine however when I connect the usb cable it charges for about 2 seconds but then stops and I can’t play music over Usb.

Parrot MKi Car Kit downloads | Parrot Support Center

The alert tones are sent by the phone and the Parrot is playing what it has been sent (as it’s supposed to do). Have updated many of the Mki9200’s – it nearly always goes without a hitch, but there are ones that do not go smoothly and it can destroy the control box.I’m having a strange problem with my MKI9200. Everything works fine however the screen stops working as soon as i connect my iphone through bluetooth. Everything still works fine with the bluetooth and I can use the spoken menu with the remote but the screen just freezes once bluetooth is connected. Any ideas? From your description I would guess you have an iPhone and this will push all alert tones via Bluetooth. Apple have never cured this “feature”, despite repeated requests. Remove all paired devices from the MKi9200 ( Settings \ Bluetooth \ Phone (x) \ Press centre button, scroll to delete and then press Green button to confirm ). Do this for all paired devices.