Fiskars Paper Circle Cutter

Product Information

Our tile cutters feature durable construction and advanced blade technology, reducing the risk of shattering and chipping. If you don’t know what these tools do, then it’s quite simple…they allow the modeller to cut out discs in masking paper and very thin plasticard etc. Simply adjust the cutter to the desired measurement, place on the paper and turn the device to cut the circle with the sharp blade. For anything bigger than that, you’ll need to break out a jigsaw, table saw, or circle-cutting jig for your jigsaw. For those of us who don’t have a giant workspace filled with fancy jigsaws, table saws, and plunge routers, cutting clean circles can be kind of a pain.

Slide the Dremel’s cutting bit through the middle of the plastic housing with the guide line, which is the flat length of metal with the hash marks, at the bottom. The cutting tools are amazingly sharp and should be kept in their plastic protectors when not in use. Lift it up and set it on its side to disassemble the circle cutter kit or measure out your next cut.Vanguard Models - 1:64 HMS Sphinx 1775, Vanguard Models - 1:64 ERYCINA - Plymouth Ketch-Rigged Trawler 1882, Vanguard Models - 1:64. If you’re cutting all the way through a material, set the cutting depth to be at least 1⁄ 4 inch (0. If you let go of the tool once the material falls out, you’re going to have an expensive and dangerous piece of equipment falling to the floor and potentially cutting your feet. Check the base of the guide line to make sure it’s resting flat on surface you’re cutting and double-check the cutting bit on the Dremel to make sure it lines up with the circle you drew before moving forward.

If the guide line doesn’t sit flush on the surface you’re cutting because the Dremel bit is too long, drill a pilot hole on your outline to give the cutting bit some room to stick out at the bottom while you insert the pivot foot in the center point. The lid is a seriously snug fit, and once you overcome the suction when you remove it, you’ll find a removable tray with foam cut-outs. Then, further personalize your design by making enhancing adjustments, adding text, and topping it off with animation. This contains three different cutting tools in their own plastic box, tool assembly components and a screwdriver. Unlike the Thinnerline tool which is essentially based upon a bearing, with internal parts, the DSPIAE tool is also enveloped in an aluminium case that protects the bearing.The gauge works so that the close to the centre of the bearing you adjust the pointer, the smaller the mask. Keep in mind, while there are dozens of different tools produced by the company named Dremel, these steps only apply to the popular rotary tool that most people are thinking of when they reference a “Dremel. comes in a very attractive, robust and heavy box whose quality is pretty reminiscent of the way Apple packages its products. The round, black case sticking up from one side of the cutting guide is your cutting guide’s housing. Cut perfect circles every time with this fantastic circle cutter with adjustible head to create circles from 10mm up to 300mm.